What kind of oil does a chevy malibu 2010 take
What kind of oil does a Chevy Malibu take?
A 1.5L-equipped Malibu requires 4.2 quarts of 0w20 dexos1™ full synthetic oil. A Malibu with a 2.0L engine requires 5 quarts of 5w30 dexos1™ oil. Not all oils are the same.
How much oil does a 2010 Chevy Malibu take?
5 quarts
Capacity: 5 quarts. . . . (with filter)After refill check oil level.
How much oil does a 2010 Chevy Malibu V6 take?
The type of oil that is used in the 2010 Chevrolet Malibu iS5W-30 Synthetic for both the 2.4 L 4Cylinder and the 3.6 L V6 engine. The capacity for the Malibu iS5 quarts with a filter for the 2.4 L 4Cylinder and 5.5 quarts with a filter for the 3.6 L V6 engine.
Can a Chevy Malibu take conventional oil?
Every 2014 Chevy Malibu oil change is performed by our factory-trained mechanics and includes a multi-point inspection, as well. … For example, 4 cylinder passenger cars take less oil, and naturally use conventional oil, compared to a vehicle with a high-performance V-8 engine, which may require full synthetic motor oil.
What type of oil does a 2011 Chevy Malibu take?
Chevy Malibu 2011, SAE 5W-30 Full Synthetic Motor Oil, 1 Quart by Idemitsu®.
What kind of oil does a 2009 Malibu take?
The SAE classification 5W-30 is the best engine oil for the 2009 Chevrolet Malibu. The 2009 Chevrolet Malibu 2.4L L4 engine oil holds 7.5 quarts (7.1 Liters) while the 3.5L V6 and 3.6L V6 engine holds 9.7 quarts (9.2 Liters).
What kind of oil is SAE 5W-30?
What is 5w30 oil? 5w30 is a motor oil that is widely used in light-duty petrol and diesel engines. Like most motor oils produced today, 5w30 is a multi-grade oil, meaning it ranges from a lower viscosity grade of 5 to a higher viscosity grade of 30.
How do you change the oil on a 2010 Chevy Malibu?
How much oil does a 3.6 Chevy Malibu take?
Engine Oil
5.5 quarts. . . . (with filter)After refill check oil level.
What type of oil does a 2012 Chevy Malibu take?
Valvoline Synthetic Motor Oil 5W-30 5 Quart.
How much oil does a Chevy Malibu 2011 take?
Capacity: 5 quarts (with filter)After refill check oil level.
How do you change the oil on a 2011 chevy malibu?
What cars can use 5W-30 oil?
’30’ is often for newer petrol engines, while ’40’ is often for older or diesel engines. 5W-30 and 5W-40 oils are compatible with some models of common cars, like the Ford Focus, Ford Ka, Honda Civic and VW Golf.
Is 5W-30 conventional or synthetic?
For example, conventional 5W-30 motor oil is a petroleum-based oil that is thick at low temperatures and thin at high temperatures. To change this variance, oil manufacturers use additives to change the oil’s properties, reducing its viscosity at lower temperatures and thickening the oil at higher temperatures.
Is 5W-30 full synthetic?
5W-30 motor oil is one of the most common viscosity grades and is available from Castrol in advanced full synthetic, premium full synthetic and synthetic blend options.
How much oil does a 2.4 Ecotec take?
5 quarts. . . . (with filter)After refill check oil level.
What oil does a 2013 Chevy Malibu take?
The proper oil for the 2013 Chevrolet Malibu is the SAE 5W-30 viscosity grade engine oil for the 2.0L engine and 2.4L engine.
How often should I change my oil on a 2012 Chevy Malibu?
Chevy recommends getting your 2012 Chevy Malibu oil & filter changed any 3,000-5,000 miles for conventional oil. Synthetic oil usually should be changed any 7,500 – 10,000 miles.
When should I use 5W-30 oil?
5W-30 oil is primarily a winter viscosity grade motor oil. While it does perform adequately at a higher temperature, its best use is for people who drive in cold temperature regions. Due to its lower viscosity, it’s typically recommended for petrol vehicles or a light-duty diesel engine.
How do I know what oil to put in my car?
There’s no substitute for reading your owner’s manual. It will list what type of oil the automaker recommends for your car. It may also recommend different oil depending on whether you live in a hot or cold climate. The most important thing is to use oil that’s the right thickness, or viscosity, for your car’s engine.
Can I use 5W-30 instead of 5w20?
Can You Use 5w30 Instead Of 5w20. It is not recommended. Although they both have the same winter rating of 5, the thickness (viscosity) of 5w30 is a bit higher than 5w20. That means your engine’s at stake for using the high viscosity oil.
What type of oil does a 2010 Chevy Equinox take?
Chevy Equinox 2010, SAE 5W-30 Full Synthetic Motor Oil, 1 Quart by Idemitsu®.
How many quarts of oil does a 2010 Chevy Equinox 2.4 take?
2010 Chevrolet Equinox Tech Specs
2010 Chevrolet Equinox Dimensions | |
---|---|
Exterior | |
Engine oil (qt / L): | 5 / 4.7 (2.4L) 6 / 5.7 (3.0L) |
Cooling system (qt / L): | 8.9 / 8.5 (2.4L) 10 / 9.5 (3.0L) |
* SAE certified. |
•
Jul 24, 2009